EDITOR - Waves

Modding, patches, etc., for anyone who speaks neither Polish nor Czech.
User avatar
Morphid
Site Administrator
Site Administrator
Czech Republic
Posts: 86
Joined: Sat Dec 25, 2010 12:48 am
Location: Czech Republic
Contact:

EDITOR - Waves

Post by Morphid »

I have tried to add waves to my map... but unsuccessfully. Which colours have dots on the start of the "red line"? In my case, I have a "water" effect everywhere on the map (Units have foots under the water).

Please, who knows a faithful method, answer it in detail. Thanks.
User avatar
Serpent
Soldier level 10
Soldier level 10
Estonia
Posts: 4175
Joined: Tue Jul 07, 2009 9:13 pm
Location: Polska - EuroStan ZSRE
Contact:

Re: EDITOR - Waves

Post by Serpent »

Hi Morphid :P

Grndsc is broken because done GBI can not load.

So you cannot add waves to map.
Epickie teksty:
Marek1906: jak zrobic aby sail był zielony?
Kvantovy: Wszystko normalne, wszystko w koło było dziwne
Kvantovy:: To jest fajne, że to nie jest takie głupie
Kvantovy:: remove sos from kanapeczka
Kvantovy:: zdarzają się rzezy które sie filozofom nie śniły
Cenwen: problemem jest gejostwo
"Taki z niego fizyk jak ze mnie baletnica" - Profesor Scholtze o Kvantovym.
JAKBYŁ BYM CZECHEM TO BYM ROZŁOŻYŁ NAMIOT ~Kvanciak
User avatar
Nitek
Community Veteran
Community Veteran
Posts: 999
Joined: Mon Apr 13, 2009 4:13 pm
Location: Białystok
Contact:

Re: EDITOR - Waves

Post by Nitek »

AFAIK you can add waves. Stucuk wrote about this in this topic on OWS - http://forum.stucuk.net/viewtopic.php?f=6&t=1120
User avatar
Morphid
Site Administrator
Site Administrator
Czech Republic
Posts: 86
Joined: Sat Dec 25, 2010 12:48 am
Location: Czech Republic
Contact:

Re: EDITOR - Waves

Post by Morphid »

But how says Serpent, I can't load a GBI in grndsec =(..

Unless I would import bmp and *.wi file and after it bitmap with waves.. Will it function?
Radzio
Site Administrator
Site Administrator
Poland
Posts: 2898
Joined: Fri Jul 28, 2006 10:58 am
Location: Bialystok, Poland

Re: EDITOR - Waves

Post by Radzio »

Yes, it should.
User avatar
Morphid
Site Administrator
Site Administrator
Czech Republic
Posts: 86
Joined: Sat Dec 25, 2010 12:48 am
Location: Czech Republic
Contact:

Re: EDITOR - Waves

Post by Morphid »

This is my steps (not function =D)

I export Water Heigh map.. the exported bmp I duplicate.

On the first of them (water anim) I do red lines (RGB: 255 0 0) with yellow dot (RGB: 255 255 0) and light blue water and other "white" parts of map I do in blue (RGB: 0 0 255)... (finally I have blue image with red lines and yellow dots) - In other cases editor report an error: Too many waves on the map!

The second of them is water heigh map... I import Water Anim Map and after it I import Water Heigh map... in the end I export Water Image as bin (water.wi)..

GBI
In grndsec I open my bmp with textures and import WI file... Click on Autopack and save as GBI to GroundBI folder in my mod. In editor I import gbi (>save, restart..). set waves requested to number higher than 0 and when I start the mission, editor(mission) doesn't work.

What is wrong?
Radzio
Site Administrator
Site Administrator
Poland
Posts: 2898
Joined: Fri Jul 28, 2006 10:58 am
Location: Bialystok, Poland

Re: EDITOR - Waves

Post by Radzio »

You don't see waves?
User avatar
Morphid
Site Administrator
Site Administrator
Czech Republic
Posts: 86
Joined: Sat Dec 25, 2010 12:48 am
Location: Czech Republic
Contact:

Re: EDITOR - Waves

Post by Morphid »

No, I don't see waves :( because If I set "waves requested" number higher than 0, atfer CTRL+E editor shutting down (and when "waves requested" is 0, waves are not visible)
User avatar
Serpent
Soldier level 10
Soldier level 10
Estonia
Posts: 4175
Joined: Tue Jul 07, 2009 9:13 pm
Location: Polska - EuroStan ZSRE
Contact:

Re: EDITOR - Waves

Post by Serpent »

Hej in WIKI OWS has wrote "Load GBI(not bmp!) and Import WI." .Morphid I do it this same what are you but i don't make waves...

I wonder if you can succeed :P
Epickie teksty:
Marek1906: jak zrobic aby sail był zielony?
Kvantovy: Wszystko normalne, wszystko w koło było dziwne
Kvantovy:: To jest fajne, że to nie jest takie głupie
Kvantovy:: remove sos from kanapeczka
Kvantovy:: zdarzają się rzezy które sie filozofom nie śniły
Cenwen: problemem jest gejostwo
"Taki z niego fizyk jak ze mnie baletnica" - Profesor Scholtze o Kvantovym.
JAKBYŁ BYM CZECHEM TO BYM ROZŁOŻYŁ NAMIOT ~Kvanciak
Radzio
Site Administrator
Site Administrator
Poland
Posts: 2898
Joined: Fri Jul 28, 2006 10:58 am
Location: Bialystok, Poland

Re: EDITOR - Waves

Post by Radzio »

Serpent wrote:Hej in WIKI OWS has wrote "Load GBI(not bmp!) and Import WI." .Morphid I do it this same what are you but i don't make waves...

I wonder if you can succeed :P
Some people succeeded :P
User avatar
Morphid
Site Administrator
Site Administrator
Czech Republic
Posts: 86
Joined: Sat Dec 25, 2010 12:48 am
Location: Czech Republic
Contact:

Re: EDITOR - Waves

Post by Morphid »

Has anybody the "water_test" archive from OWS? It isn't there (file not found). Probably it would help me.
User avatar
Gothuk
Site Administrator
Site Administrator
Poland
Posts: 985
Joined: Tue Sep 04, 2007 6:10 pm
Location: Poland, Warsaw
Contact:

Re: EDITOR - Waves

Post by Gothuk »

User avatar
Morphid
Site Administrator
Site Administrator
Czech Republic
Posts: 86
Joined: Sat Dec 25, 2010 12:48 am
Location: Czech Republic
Contact:

Re: EDITOR - Waves

Post by Morphid »

Very thanks, Gothuk! =)
User avatar
Morphid
Site Administrator
Site Administrator
Czech Republic
Posts: 86
Joined: Sat Dec 25, 2010 12:48 am
Location: Czech Republic
Contact:

Re: EDITOR - Waves

Post by Morphid »

Ok. The problem was solved. I imported a color palette from "water test" and applied it to my image. Thanks all :)
Radzio
Site Administrator
Site Administrator
Poland
Posts: 2898
Joined: Fri Jul 28, 2006 10:58 am
Location: Bialystok, Poland

Re: EDITOR - Waves

Post by Radzio »

Could you then kindly add your experiences to this tutorial: http://wiki.owsupport.com/index.php?title=Grndsec
so that everyone could profit?
Post Reply